-40%
1979 Standard Modern 20
1979 Standard Modern 20
1979 Standard Modern 20

1979 Standard Modern 20" x 80" Lathe

$ 5755.2

Availability: 100 in stock
  • All returns accepted: ReturnsNotAccepted
  • Condition: Used Machine, Sold As-Is. No warranty expressed or implied.This is a “USED” machine, sold “AS-IS”, no warranty expressed or implied through this Ebay listing, unless otherwise stated differently.All specifications are subject to verification upon inspection. We encourage all of our customers to inspect machinery in person, prior to purchase. Videos and additional pictures available by request. Buyer is responsible for shipping/freight.

    Description

    20" x 80" STANDARD MODERN, 12" 3 Jaw Chuck, 10" Steady Rest, Taper, 1979   Our stock number: 6990
    Machine Specifications:
    SWING OVER BED: 22"
    SWING OVER BED AND SADDLE WAYS: 20"
    SWING OVER CROSS SLIDE: 12"
    CENTER DISTANCE: 80"
    MAIN DRIVE MOTOR: 15 HP
    BAR CAPACITY 3"
    HEADSTOCK
    SPINDLE SPEEDS (18): 27 - 1600 RPM
    SPINDLE NOSE - CAMLOCK: D1-8"
    THROUGH HOLE IN SPINDLE: 3.06"
    SPINDLE CENTER: #5 MT
    GEAR BOX
    FEED AND THREAD SELECTIONS: 66
    INCH FEED RANGE: .0015 - .105 IPR
    INCH THREAD RANGE: 2 TO 127 TPI
    METRIC FEED RANGE: .04 TO 2.67 MM/REV
    METRIC LEAD RANGE: .2 TO 14 MM
    APRON
    HANDWHEEL - ONE REVOLUTION: 1"
    HALF NUTS: DOUBLE
    HIGH SPEED THREADING TO: 800 RPM
    REPEATABILITY OF AUTO CARRIAGE STOP: +.005"
    FEED TORQUE CONTROL: VARIABLE
    CARRIAGE CROSS-SLIDE
    CARRIAGE LENGTH ON BED: 21"
    CARRIAGE BRIDGE WIDTH: 10"
    CROSS-SLIDE LENGTH: 24"
    CROSS-SLIDE TRAVEL: 12"
    COMPOUND TRAVEL: 5"
    DIRECT READING DIAL GRADUATION: .001"
    TAILSTOCK
    QUILL DIAMETER: 2.94"
    QUILL TRAVEL: 8"
    MORSE TAPER: #5 MT
    OFFSET: +.75"
    BED AND BASE
    BED WIDTH: 14"
    BED DEPTH: 12-1/2"
    BED LENGTH: 124"
    BASE LENGTH: 134"
    BASE WIDTH: 30"
    GENERAL
    DIMENSIONS, APPROX: 11' LR X 4' FB X 4'8" H
    ELECTRICS: 220 VOLTS, 3 PH, 60 CYC
    Equipped With:
    12" 3 Jaw Chuck
    12" Face Plate
    10" Steady Rest
    Live Center
    Chip Pans
    In/Mt Threading
    Thread Dial
    Taper Attachment
    Used Machine, Sold As-Is. No warranty expressed or implied.This is a “USED” machine, sold “AS-IS”, no warranty expressed or implied through this Ebay listing, unless otherwise stated differently.All specifications are subject to verification upon inspection. We encourage all of our customers to inspect machinery in person, prior to purchase. Videos and additional pictures available by request. Buyer is responsible for shipping/freight.