3M 3D Printer Surface Adhesive Sheet 305mm x 305mm (12" x 12")

Description

3M adhesive film for 3D printing.
Thin 3M heat conductive adhesive sheet allows adhering of Garolite sheets to spring steel print surface.
305 x 305 (12" x 12")
Allows for more consistent heat transfer to Garolite print surface.
When bonded to a spring steel magnetic surface, eliminates the need for hold down clips.
* Garolite sheet and other bonding surface should be free of oil and debris, wipe down with alcohol and allow to dry before adhering the 3M sheet.
** Apply at one end and slowly press down evenly to avoid trapped air pockets.
***Please see youtube video: Design Test Prototype "
The Ultimate Ender 3 Evolution - A Nylon and Polycarbonate Printing Beast"
*** 3M sheets may be cut to size with a razor blade and straight edge or paper slicer. I install my adhesive sheets prior to cutting to the correct size, then trim off the excess.