-40%

P&S Lt Almond 1050 sq ft Passive Infrared Switch Occupancy Sensor 800W WSP250-LA

$ 23.75

Availability: 100 in stock

Description

Fruit Ridge Tools, LLC
Our eBay Store
Contact Us
Add to Favorite Sellers
P&S Lt Almond 1050 sq ft Passive Infrared Switch Occupancy Sensor 800W WSP250-LA
Product Details
Quantity in Lot:
1
Brand:
Pass & Seymour
Part Number:
WSP250-LA
Color:
Light Almond
Type:
Passive Infrared Sensor
Switch Configuration:
Single Pole
Additional Features (if applicable):
1050 Square Feet
Voltage:
120/277V AC
Grade:
Commercial Specification Grade
Terminal Type(s):
Back and Side Wired
Ground:
Grounding Wire
Pass & Seymour WSP250-LA light almond PIR automatic occupancy sensor wall switch. It is rated for 800W at 120V for incandescant lights. It is also rated for 1200W at 277V for Fluorescent Lights. This is a single pole, back and side wired, grounding, 120/277VAC, 60Hz, 1/6HP, time delay of 30 sec. - 30 min., 180 degree field of view up to 1050 sq. ft. Each is individually packaged; packaging may differ from photos. Features include:
ASIC provides high immunity to RFI and EMI
180 degree coverage of up to 1050 sq. ft
Compact, decorator design replaces existing wall switch
Dual 1 20/277VAC operation
Integrated light level sensor works from 2 to 200 footcandles
Compatible with all electronic ballasts and PI lamp ballasts
No minimum load requirement
30% to 60% energy savings
Adjustable sensitivity from 20% to 100%
Patented voltage drop protection
Patent Pending Zero Crossing Circuitry
Positive detection indicator
Small, individual offices
Sensors should have a direct, clear, front view of stationary occupants. Be sure sensors will not be blocked by doors, filing cabinets, etc
Small conference rooms under 300 sq. ft
To ensure detection at the far end of a room, it is recommended that the wall switch sensor be within 20 feet of the farthest wall
A wall sensor is suitable for break rooms up to 300 sq. ft.
If there is a clear view of the room from the light switch. For a room with an open wall that leads to other areas, masking material is included so the coverage zone may be more tightly defined. Using a CS1001 ceiling mount sensor is an alternative to masking
In copy and work rooms smaller than 300 sq. ft
An automatic switch works well; however, if large copiers block the sensor's view, use a ceiling mount PIR sensor
An automatic wall switch sensor will work well in a utility room smaller than 300 sq. ft.
However, if occupants spend lengthy periods of time behind cabinets or other structures, an ultrasonic sensor is a better choice
This is New Old Stock and is returnable for any reason. (SKU # PASWSP250-LA-EA; Weight: 0.4 lbs.)