Peruzzo TB100C PRO Palm Frond Shredder&Wood Chipper, Self-Power, Hyd Roller Feed

Description

Peruzzo TB100C PRO, Self Feeding, Self-Powered, Self-Propelled, Tracked Palm Frond Shredder & Wood Chipper with Auto Regulated Hydraulic Roller Power Feed, and
Drum Style Rotor!
Expect This Chipper & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well For A Lifetime And Provide A Good Resale Value Too!
[isdntekvideo]
GENERAL FEATURES:
Peruzzo's Drum Type Chippers Offer Superior Performance & Results, and Less Maintenance Than Rotor/Disc Style Chippers.  Also, with the TB100C-Pro's Auto Regulated Hydraulic Roller Power Feed, Efficient Performance & Stability Are Maximized!
Watch the Embedded Video & Observe the Swift Self-Feeding System, the Stable Holding of Branches as they Pass Thru the Hopper, The Stable Condition of the Chipper Itself, and the Smaller & Uniform Size of the Chips.
Unlike the Rotor/Disc Style Chippers, This Peruzzo Drum Chipper Does Not Allow Violent Movement of Limbs & Branches During The Intake/Feeding Process, which creates a Potential for Head Knockers, Eye Pokers, etc - A Tremendous Safety Issue!
Also Unlike the Rotor/Disc Style Chippers, the Chipper is Not Vibrating, or Bouncing Around, Which Leads to Premature Wear & Tear on the Chipper, and also Introduces Another Safety Hazard.
With the 4" Tall x
12" Ultra-Wide Throat Opening
Enabling the Worst, Most Serpentine & Clumsy Pieces to be Fed, Chainsaw Work is Reduced, and Clogging is Minimized.
This Large Throat Opening Accommodates Chipping Dimensional Lumber, Cane Type Plants & Shrubs, Palm Fronds, Cactus Leaves & Other Vegetation!
A 12" Wide Throat is The Widest Throat Opening Available for a 4" Chipper.  In Fact, Typically, You'd Have to Get a 7" Chipper to Get a 12" Wide Throat Opening.
Chipper Has 2 Double Sided, Hardened Tool
Steel, Presharpened Drum Blades.
Red Mushroom Push Button Kill Switch on Top of Feed Hopper.
Yellow Feed Control & Safety Handle Around Circumference of Hopper Opening, for the Following Functions:
OFF- Feed Stop!
Forward (Feed)
Reverse (Back-Out)
Tracks Are Operated With Forward & Reverse Levers (One On Each Handle) & Drive Engage Lever at Left Handle.
Transmission Has 3 Forward & 1 Reverse Speed, With Clutch Free Manual Lever Selection.
Powder Coated Paint!
SPECIFICATIONS:
Chipper is Self-Powered with a 23HP, KEY START Vanguard Gas Engine.
Chipper is Self-Propelled with a 5HP Pull Start Vanguard Gas Engine.
4" Tall x 12" Wide Throat Opening.
The Chipper Drum with 2 Embedded Blades Provides The Best Self-Feeding Chipper On The Market!
Double Sided Drum Blades Reduces Time Required Between Sharpening's.
Drum is 6" X 12" Wide.
Hopper is 18" Tall x 20" Wide x 42" Deep to Blades.
With Chipper on the Ground, it's 42" to Bottom of Hopper Feed Shelf.
As Shown in Photo, it's 65" From Grade to the Tip of Deflector.
Tracks are 7.25" Wide x 36" Long.
Outside to Outside of Tracks is 26" - This is Widest Point of Chipper.
Overall Length of Chipper is 7'.
Length is From End of Handles to Deflector (folded down).
Total Weight is 1113lb's (Less Pallet/Crating, etc.).
Cutting Head Weight is 53lb's!
Specifications are based on manufacturer provided data & subject to change.
Provide Us With Your Zip Code For A Quote Of Our Affordable Nationwide Shipping Prices!
AVAILABILITY VARIES FROM SEASON TO SEASON - YOU'RE WELCOME TO CHECK ON CURRENT AVAILABILITY!
Farm Equipment 24-7
eBay Store of
Iowa Farm Equipment
A FULL SERVICE DEALERSHIP
Providing Parts & Warranty Coverage Nationwide!