R--22 MO99 Replacement R438A, Same As MO99, 5 Lb. STOP LEAK, PROSEAL System Seal

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
R--22 MO99 Replacement R438A, Same As MO99, 5 Lb. STOP LEAK, PROSEAL System Seal
FREE SHIPPING!!
We have the best price on
eBay
ON THIS #1 r22 REPLACEMENT!.
R22, R-22 Replacement, R438a
R438a which is the same as MO99.
R22 #1 Replacement , R438a
Refrigerant,
5
Lb.
Tank
New and factory Sealed
(1) 5 Lb. Tank of R438a Refrigerant
This listing is for a 5 Lb. Tank Of Refrigerant R-438a with ProSeal XL4 Stop Leak System Sealer
.
**The ProSeal XL4 contained in this 5 lb. can of Refrigerant R438a is good for systems that are 1.5 ton to 5 tons in size.
*Please shake well before use and charge with liquid if possible (can inverted) upside down for liquid.
PROSEAL XL4 DETAILS:
This can of Refrigerant R438a contains one of our most requested products, ProSeal Xl4 system sealer!!
ProSeal XL4 is a refrigerant leak sealant.
ProSeal XL4 is compatible with all refrigerants except ammonia.
ProSeal XL4  performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
The manufacturer of ProSeal XL4 has been in business for over 17 years.
ProSeal XL4 was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4  travels with the gas, which makes it faster, and more
effective
at locating and sealing the leak(s).
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets.
Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves,
O-rings
, gaskets, a/c condensers, evaporators, line sets and solder joints.
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils
No need to pump-down the system.
This listing is for a 5 Lb. Tank Of Refrigerant R-438a with ProSeal XL4.
Description
R438a which is the same as MO99, is simply the best refrigerant if you are considering replacing the refrigerant in your old home air conditioning system.
Refrigerant R438a is ideal because it  cools as well as R22 while costing significantly less.
Refrigerant™ R438a/MO99 refrigerant has proven to be a reliable and cost-effective, non-ozone depleting retrofit refrigerant.
In many cases, systems converted to this refrigerant are operating with the same mineral oil or lubricant that was used with the previous refrigerant.
Refrigerant R438/MO99 refrigerant has shown to provide similar system performance as when operating with the previous refrigerant.
Using these retrofit guidelines, direct expansion (DX) residential and commercial air conditioning, and medium and low temperature refrigeration systems containing R-22 can be easily and economically converted to refrigerant R438a/MO99.
This allows existing equipment to continue operating safely and effectively for the remainder of its useful life.
Retrofit Choice for R-22 Direct Expansion Systems in Residential and Commercial Air Conditioning, Direct Expansion Chillers, Medium- and Low-Temperature Refrigeration
refrigerant R438a/MO99 is a non-ozone depleting HFC refrigerant designed to replace R-22 in existing DX residential and commercial AC and medium- and low-temperature refrigeration systems.
Refrigerant R438a/MO99 is compatible with traditional and new lubricants; in most cases, no change of lubricant type during retrofit is required.
Oil return is determined by a number of operating and design conditions; in some complex systems, ester lubricant (POE) may need to be added.
Minor equipment modifications (e.g., seal replacement) or expansion device adjustments may be required in some applications.
Field experience has shown that refrigerant R438/MO99 provides performance that meets customer requirements in most properly retrofitted systems.
Refrigerant R438a/MO99 provides similar cooling capacity and energy efficiency to R-22 in most systems, while operating at a lower compressor discharge
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
FREE SHIPPING!! We have the best price on eBay ON THIS #1 r22 REPLACEMENT!. R22, R-22 Replacement, R438a R438a which is the same as MO99. R22 #1 Replacement , R438a Refrigerant, 5 Lb. Tank New and factory Sealed (1) 5 Lb. Tank of R438a Refrigerant This listing is for a 5 Lb. Tank Of Refrigerant R-438a with ProSeal XL4 Stop Leak System Sealer . **The ProSeal XL4 contained in this 5 lb. can of Refrigerant R438a is good for systems that are 1.5 ton to 5 tons in size. *Please shake well before use and charge with liquid if possible (can inverted) upside down for liquid. PROSEAL XL4 DETAILS: This can of Refrigerant R438a contains one of our most requested products, ProSeal Xl4 system sealer!!ProSeal XL4 is a refrigerant leak sealant. ProSeal XL4 is compatible with all refrigerants except ammonia. ProSeal XL4 performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. The manufacturer of ProSeal XL4 has been in business for over 17 years. ProSeal XL4 was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014. ---Unlike most other products on the market, ProSeal XL4 travels with the gas, which makes it faster, and more effective at locating and sealing the leak(s). --- --- ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets. --- ---Sealing leaks will save energy and lower refrigerant emissions. --- ---Forms a hard seal on metal, schrader valves, O-rings, gaskets, a/c condensers, evaporators, line sets and solder joints. --- ---Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary. --- ---If there is still Proseal XL4 in the system it will reseal the schrader. --- ---This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units. --- ---Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils --- ---No need to pump-down the system. This listing is for a 5 Lb. Tank Of Refrigerant R-438a with ProSeal XL4. Description R438a which is the same as MO99, is simply the best refrigerant if you are considering replacing the refrigerant in your old home air conditioning system. Refrigerant R438a is ideal because it cools as well as R22 while costing significantly less. Refrigerant™ R438a/MO99 refrigerant has proven to be a reliable and cost-effective, non-ozone depleting retrofit refrigerant. In many cases, systems converted to this refrigerant are operating with the same mineral oil or lubricant that was used with the previous refrigerant. Refrigerant R438/MO99 refrigerant has shown to provide similar system performance as when operating with the previous refrigerant. Using these retrofit guidelines, direct expansion (DX) residential and commercial air conditioning, and medium and low temperature refrigeration systems containing R-22 can be easily and economically converted to refrigerant R438a/MO99. This allows existing equipment to continue operating safely and effectively for the remainder of its useful life. Retrofit Choice for R-22 Direct Expansion Systems in Residential and Commercial Air Conditioning, Direct Expansion Chillers, Medium- and Low-Temperature Refrigeration refrigerant R438a/MO99 is a non-ozone depleting HFC refrigerant designed to replace R-22 in existing DX residential and commercial AC and medium- and low-temperature refrigeration systems. Refrigerant R438a/MO99 is compatible with traditional and new lubricants; in most cases, no change of lubricant type during retrofit is required. Oil return is determined by a number of operating and design conditions; in some complex systems, ester lubricant (POE) may need to be added. Minor equipment modifications (e.g., seal replacement) or expansion device adjustments may be required in some applications. Field experience has shown that refrigerant R438/MO99 provides performance that meets customer requirements in most properly retrofitted systems. Refrigerant R438a/MO99 provides similar cooling capacity and energy efficiency to R-22 in most systems, while operating at a lower compressor discharge
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
R--22 MO99 Replacement R438A, Same As MO99, 5 Lb. STOP LEAK, PROSEAL System Seal
FREE SHIPPING!!
We have the best price on
eBay
ON THIS #1 r22 REPLACEMENT!.
R22, R-22 Replacement, R438a
R438a which is the same as MO99.
R22 #1 Replacement , R438a
Refrigerant,
5
Lb.
Tank
New and factory Sealed
(1) 5 Lb. Tank of R438a Refrigerant
This listing is for a 5 Lb. Tank Of Refrigerant R-438a with ProSeal XL4 Stop Leak System Sealer
.
**The ProSeal XL4 contained in this 5 lb. can of Refrigerant R438a is good for systems that are 1.5 ton to 5 tons in size.
*Please shake well before use and charge with liquid if possible (can inverted) upside down for liquid.
PROSEAL XL4 DETAILS:
This can of Refrigerant R438a contains one of our most requested products, ProSeal Xl4 system sealer!!
ProSeal XL4 is a refrigerant leak sealant.
ProSeal XL4 is compatible with all refrigerants except ammonia.
ProSeal XL4  performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
The manufacturer of ProSeal XL4 has been in business for over 17 years.
ProSeal XL4 was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4  travels with the gas, which makes it faster, and more
effective
at locating and sealing the leak(s).
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets.
Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves,
O-rings
, gaskets, a/c condensers, evaporators, line sets and solder joints.
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils
No need to pump-down the system.
This listing is for a 5 Lb. Tank Of Refrigerant R-438a with ProSeal XL4.
Description
R438a which is the same as MO99, is simply the best refrigerant if you are considering replacing the refrigerant in your old home air conditioning system.
Refrigerant R438a is ideal because it  cools as well as R22 while costing significantly less.
Refrigerant™ R438a/MO99 refrigerant has proven to be a reliable and cost-effective, non-ozone depleting retrofit refrigerant.
In many cases, systems converted to this refrigerant are operating with the same mineral oil or lubricant that was used with the previous refrigerant.
Refrigerant R438/MO99 refrigerant has shown to provide similar system performance as when operating with the previous refrigerant.
Using these retrofit guidelines, direct expansion (DX) residential and commercial air conditioning, and medium and low temperature refrigeration systems containing R-22 can be easily and economically converted to refrigerant R438a/MO99.
This allows existing equipment to continue operating safely and effectively for the remainder of its useful life.
Retrofit Choice for R-22 Direct Expansion Systems in Residential and Commercial Air Conditioning, Direct Expansion Chillers, Medium- and Low-Temperature Refrigeration
refrigerant R438a/MO99 is a non-ozone depleting HFC refrigerant designed to replace R-22 in existing DX residential and commercial AC and medium- and low-temperature refrigeration systems.
Refrigerant R438a/MO99 is compatible with traditional and new lubricants; in most cases, no change of lubricant type during retrofit is required.
Oil return is determined by a number of operating and design conditions; in some complex systems, ester lubricant (POE) may need to be added.
Minor equipment modifications (e.g., seal replacement) or expansion device adjustments may be required in some applications.
Field experience has shown that refrigerant R438/MO99 provides performance that meets customer requirements in most properly retrofitted systems.
Refrigerant R438a/MO99 provides similar cooling capacity and energy efficiency to R-22 in most systems, while operating at a lower compressor discharge
You must be certified by the (EPA), Section 608 or Section 609 to purchase this item.
You must show proof of certification before paying and before the item is shipped.
*If you are purchasing this item for resale only to EPA Certified Technicians then please indicate so in a message and please keep accurate records of same.
Thank you.
SHIPPING INFORMATION: We are a U.P.S. Certified Hazardous Material Shipper for both the United States and Canada.
The package will be properly labeled as a "Hazardous Materials Package" with all the required United States Department of Transportation identification labels as required in DOT-CFR Title 49 shipping regulations including "ORMD" Limited Quantities Exemption shipments.
FREE SHIPPING!!
We have the best price on
eBay
ON THIS #1 r22 REPLACEMENT!.
R22, R-22 Replacement, R438a
R438a which is the same as MO99.
R22 #1 Replacement , R438a
Refrigerant,
5
Lb.
Tank
New and factory Sealed
(1) 5 Lb. Tank of R438a Refrigerant
This listing is for a 5 Lb. Tank Of Refrigerant R-438a with ProSeal XL4 Stop Leak System Sealer
.
**The ProSeal XL4 contained in this 5 lb. can of Refrigerant R438a is good for systems that are 1.5 ton to 5 tons in size.
*Please shake well before use and charge with liquid if possible (can inverted) upside down for liquid.
PROSEAL XL4 DETAILS:
This can of Refrigerant R438a contains one of our most requested products, ProSeal Xl4 system sealer!!
ProSeal XL4 is a refrigerant leak sealant.
ProSeal XL4 is compatible with all refrigerants except ammonia.
ProSeal XL4  performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
The manufacturer of ProSeal XL4 has been in business for over 17 years.
ProSeal XL4 was designed and tested during 2013/2014 and has been produced and marketed under private label since the fall of 2014.
Unlike most other products on the market, ProSeal XL4  travels with the gas, which makes it faster, and more
effective
at locating and sealing the leak(s).
ProSeal XL4 Inject will seal most leaks when used according to the manufacturer’s instructions and will seal most small holes located in the A/C condenser, evaporator, fittings, and metal line sets.
Sealing leaks will save energy and lower refrigerant emissions.
Forms a hard seal on metal, schrader valves,
O-rings
, gaskets, a/c condensers, evaporators, line sets and solder joints.
Even though Proseal XL4 can form a seal on the schrader valve, when you hook up to it the seal will release and allow you to use the schrader if necessary.
If there is still Proseal XL4 in the system it will reseal the schrader.
This product performs best in heat pumps, split and mini- split units, packaged units, microchannel coils, coolers, and commercial units.
Applications: heat pumps, split systems & mini split units, packaged units, and microchannel coils
No need to pump-down the system.
This listing is for a 5 Lb. Tank Of Refrigerant R-438a with ProSeal XL4.
Description
R438a which is the same as MO99, is simply the best refrigerant if you are considering replacing the refrigerant in your old home air conditioning system.
Refrigerant R438a is ideal because it  cools as well as R22 while costing significantly less.
Refrigerant™ R438a/MO99 refrigerant has proven to be a reliable and cost-effective, non-ozone depleting retrofit refrigerant.
In many cases, systems converted to this refrigerant are operating with the same mineral oil or lubricant that was used with the previous refrigerant.
Refrigerant R438/MO99 refrigerant has shown to provide similar system performance as when operating with the previous refrigerant.
Using these retrofit guidelines, direct expansion (DX) residential and commercial air conditioning, and medium and low temperature refrigeration systems containing R-22 can be easily and economically converted to refrigerant R438a/MO99.
This allows existing equipment to continue operating safely and effectively for the remainder of its useful life.
Retrofit Choice for R-22 Direct Expansion Systems in Residential and Commercial Air Conditioning, Direct Expansion Chillers, Medium- and Low-Temperature Refrigeration
refrigerant R438a/MO99 is a non-ozone depleting HFC refrigerant designed to replace R-22 in existing DX residential and commercial AC and medium- and low-temperature refrigeration systems.
Refrigerant R438a/MO99 is compatible with traditional and new lubricants; in most cases, no change of lubricant type during retrofit is required.
Oil return is determined by a number of operating and design conditions; in some complex systems, ester lubricant (POE) may need to be added.
Minor equipment modifications (e.g., seal replacement) or expansion device adjustments may be required in some applications.
Field experience has shown that refrigerant R438/MO99 provides performance that meets customer requirements in most properly retrofitted systems.
Refrigerant R438a/MO99 provides similar cooling capacity and energy efficiency to R-22 in most systems, while operating at a lower compressor discharge